4.2 gpm 4200 psi Pressure Washer KEY START Honda General Pump Skid Cold TSS1511

4.2 GPM 42000 psi Honda GX390 13 HP V-belt on the standard powder coated steel frame, marine battery box, 50 mesh inlet filter, external bypass unloader, low oil shutdown, thermal relief valve, gun/wand assembly with quick connects, 50' high pressure grey hose with quick connects, a fixed chemical injector assembly and 4 quick connect nozzles

We highly recommend adding the best high pressure 3/8" ball valve (6292.SM) to this order to allow you to turn off the flow of water to switch from the gun to a Whisper Wash 16" Ultra surface cleaner (6717) with 25 degree 2.5 nozzles.

If supplying with a garden hose from a property, use a 3/4" ID garden hose. If supplying water from a tank, use 1" non-collapsible suction hose (AGC16) with a 1" Y-strainer (YS16H).

4.2 GPM plumbing kit for pressure washers

 Includes everything needed to plumb this unit to:

• a tank, PL-4 TA
• a tote, PL-4-TO

Install a high temperature Hudson float valve (Hudson-HT) using everything you need to install it with our Hudson assembly (Hudson-A) or (HB). The Hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing.

30W Non-Detergent Oil for Pump (already in pump)

10W30 Oil in Engine (already in engine)

Can not be shipped inside the state of California 

110 lbs